Hello!
For the past couple of months, I’ve been working on an “Integrated Multi-Sensory Mpreg Simulation”, and I wanted to share what I’ve created so far. My goal was to create a simulation where I physically feel “contractions” and I’m under the control of “the process of labor”.
I call this “Multi-Sensory” because it combines 3 different devices for 3 different sensations: a silicone pregnancy belly for shape and weight, a remote controlled TENS machine for ab contractions, and a remote controlled vibrating butt plug for prostate stimulation. I call this “Integrated” because I created a phone app that coordinates the TENS machine and the vibrating butt plug.
Before I describe anything in detail, I’ll give a disclaimer that I’m providing all of this for informational purposes only, and you assume any risks yourself should you choose to do anything similar :)
The Silicone Belly:
The belly is from AliExpress:
https://www.aliexpress.com/item/7900g-su...39034.html
That link might stop working eventually, so I’ve attached a picture of it. The title of the listing was “7900g super big fake pregnant belly realistic silicone stomach tummy twins 8~10 month”, and indeed the belly is quite big and heavy!
A few notes on the belly:
The belly I received is much firmer than it looks in the pictures in the listing. The listing shows easily pressing a finger into the belly and easily pinching it, but I can’t do either with mine. Perhaps this varies from manufacturer to manufacturer, or perhaps the smaller versions are softer. It’s not a huge problem though, except that it perhaps makes it more difficult for the belly to shape itself to your body.
The belly was 359.80 USD plus 81.16 USD for shipping (440.96 USD total). Note I bought my belly shortly before Chinese New Year. This had two consequences: 1. Slower processing time since most of the country goes on a long vacation, and 2. There was a 30% off sale just after I paid :)
The listing says to send your waist size with the order so that they can customize the belt that goes around your waist to hold the belly on. The listing says the default is 85 cm. I measured my waist and it was about 90 cm, so that’s what I told them in the order. This turned out to be a mistake because the belt is very stretchy, since it’s also silicone, so it does not hold the belly tight to my stomach. I should have undersized it by as much as 25 cm or maybe more.
To solve the loose belt, I ended up having to look for an epoxy that would bond to the silicone so that I could add more velcro to the belt so that I could pull the belt tight onto my stomach. (Super glue, hot glue, etc, don’t adhere to the silicone.) I found that Sil-poxy Rubber Silicone Adhesive from Smooth-On worked. It takes 24 hours for the epoxy to fully cure, and still had a slight odor around the new velcro for some days afterwards (it was a bit cool where the belly was, and apparently warmer temperatures and higher humidity help the epoxy to cure). The epoxy was also rather expensive, 20 USD for the smallest tube I could find (e.g. on Amazon: https://www.amazon.com/gp/product/B00NGZHGFI). You can find the velcro (“sew on” velcro, the kind without adhesive) at most craft stores or fabric stores. I got a strip about 1.25 inches wide. The backing was made of nylon, and the epoxy seems to adhere to that too.
The Remote Controlled TENS Machine:
I got the TENS machine from Amazon for 69.99 USD:
https://www.amazon.com/gp/product/B07DWSZPZV
The full title of the listing was “1byone Bluetooth TENS Therapy Muscle Stimulator for Pain Relief Electronic Pulse Massager with Wireless Control App, Variable Size Electrodes Pads”, and I’ve included a picture in case the listing goes away. The manufacturer / seller is “1byone”.
The best positions for the 4 TENS pads seemed to be on my abs about 2.5 inches above and 2.5 inches below my belly button, and about an inch apart. In the app, setting the manual controls to a frequency of 35 Hz and a pulse width of 250 microseconds seemed to produce the best results. For me, intensity settings below 10% were barely noticeable. 15% to 25% produced a stronger tingle. 25% to 40% started to produce stronger “contraction”-like feel. 40-50% started to hurt a bit. Above 50% started to actually hurt. As I got used to it though (and also as the pads started to lose their adhesion / conductivity probably), I was starting to go as high as 70%. These values of course are going to vary from person to person.
One thing about this TENS unit is that every time you change a setting, it produces a beep sound. I understand that this is for safety, but this was not only annoying, it would also give a warning when a “contraction” is about to hit. So I opened up the TENS control unit and removed the little buzzer / beeper and replaced it with an LED light instead. This required some delicate soldering work since the components are pretty small.
The Remote Controlled Vibrating Butt Plug:
This was by far the easiest component of the project. The butt plug is called “Hush”, created by Lovense:
https://www.lovense.com/vibrating-butt-plug
The list price is 109.00 USD, but I actually bought their prostate massager “Edge” too, which gives a 30 USD discount on the total, bringing the price for the Hush down to 94.00 USD.
It has its own remote control app that enables you to give control of the butt plug to anyone in the world with the app. They can then send you “vibration patterns”. I tried this while wearing my belly and an mpreg fetish friend would send me “contractions” while we cammed. It was good fun!
Creating an Integrated Experience:
The final step was to combine the TENS machine and the vibrating butt plug. I spent some time reverse engineering the TENS machine’s Android app, and with some patience I was able to control the TENS machine with my own Android app. The Hush butt plug (along with the rest of Lovense’s toys) was already reverse engineered, so that part was easy. The TENS and the butt plug are both Bluetooth devices, so they can both be controlled from a single phone and app.
The final component is a 2nd app, a remote control app, which allows sending “contractions” to the app controlling the TENS machine and butt plug. It can specify the intensity of the TENS, the intensity of the butt plug vibration, and the duration. It can also send an automatically repeating pattern.
The Roleplay:
My boyfriend knows about my mpreg fetish (or “my special interest”), and I’m lucky enough that he’s ok with participating in mpreg roleplays. The idea is that I have my belly, TENS, and butt plug on, and have my phone with my controller app. He has the remote controller app. I would be going about my day at home, and at some point he would start sending me “contractions”. Eventually they would get stronger, and I’d go to him and be like “uhmm, I think I’m in labor”. The contractions continue to grow, until we finally go to the bedroom. He keeps dialing up the intensity, and he has to coach me and “help relieve the pressure” (basically jack me off :) ) until I finally “give birth” (reach orgasm :D ).
We tried this over the weekend, and while there were a couple technical glitches (the butt plug in particular would disconnect sometimes for some reason), we overcame those, and overall it was a really intense and enjoyable experience!
Future Plans:
One feature I’m going to add is an “automatic” mode to the app. In this mode, the app automatically at some random time starts “labor”. It continues to ramp up the intensity, while randomly varying the frequency and duration of “contractions”, but generally making them last longer and start closer together. This adds some exciting unpredictability and allows both roleplay partners to be “at the mercy of labor”.
I also have an inflatable dildo, which is great for simulating “dilation”. “The booty sweller”, about 35 USD:
https://www.adameve.com/adult-sex-toys/d...98634.aspx
It would be very interesting to integrate this somehow into the simulation and have it be controlled by the app and automatically inflate over time. I would have to work out an air pump, a control mechanism, and some way to attach it to the inflatable dildo.
Finally, I’d like to add stirrups to the roleplay. My boyfriend and I tried some ropes tied to my feet, and then the ropes tied behind my back, but this didn’t give the right feel. I’d prefer something supporting my feet from below, and something to actually push my feet against.
Conclusion:
It’s been a fair bit of work getting all the different components together, but for me overall I think it was a great project to work on. The end result is a roleplay with whole new dimensions and sensations. Happy to answer any questions I can! Thanks for reading :)
For the past couple of months, I’ve been working on an “Integrated Multi-Sensory Mpreg Simulation”, and I wanted to share what I’ve created so far. My goal was to create a simulation where I physically feel “contractions” and I’m under the control of “the process of labor”.
I call this “Multi-Sensory” because it combines 3 different devices for 3 different sensations: a silicone pregnancy belly for shape and weight, a remote controlled TENS machine for ab contractions, and a remote controlled vibrating butt plug for prostate stimulation. I call this “Integrated” because I created a phone app that coordinates the TENS machine and the vibrating butt plug.
Before I describe anything in detail, I’ll give a disclaimer that I’m providing all of this for informational purposes only, and you assume any risks yourself should you choose to do anything similar :)
The Silicone Belly:
The belly is from AliExpress:
https://www.aliexpress.com/item/7900g-su...39034.html
That link might stop working eventually, so I’ve attached a picture of it. The title of the listing was “7900g super big fake pregnant belly realistic silicone stomach tummy twins 8~10 month”, and indeed the belly is quite big and heavy!
A few notes on the belly:
The belly I received is much firmer than it looks in the pictures in the listing. The listing shows easily pressing a finger into the belly and easily pinching it, but I can’t do either with mine. Perhaps this varies from manufacturer to manufacturer, or perhaps the smaller versions are softer. It’s not a huge problem though, except that it perhaps makes it more difficult for the belly to shape itself to your body.
The belly was 359.80 USD plus 81.16 USD for shipping (440.96 USD total). Note I bought my belly shortly before Chinese New Year. This had two consequences: 1. Slower processing time since most of the country goes on a long vacation, and 2. There was a 30% off sale just after I paid :)
The listing says to send your waist size with the order so that they can customize the belt that goes around your waist to hold the belly on. The listing says the default is 85 cm. I measured my waist and it was about 90 cm, so that’s what I told them in the order. This turned out to be a mistake because the belt is very stretchy, since it’s also silicone, so it does not hold the belly tight to my stomach. I should have undersized it by as much as 25 cm or maybe more.
To solve the loose belt, I ended up having to look for an epoxy that would bond to the silicone so that I could add more velcro to the belt so that I could pull the belt tight onto my stomach. (Super glue, hot glue, etc, don’t adhere to the silicone.) I found that Sil-poxy Rubber Silicone Adhesive from Smooth-On worked. It takes 24 hours for the epoxy to fully cure, and still had a slight odor around the new velcro for some days afterwards (it was a bit cool where the belly was, and apparently warmer temperatures and higher humidity help the epoxy to cure). The epoxy was also rather expensive, 20 USD for the smallest tube I could find (e.g. on Amazon: https://www.amazon.com/gp/product/B00NGZHGFI). You can find the velcro (“sew on” velcro, the kind without adhesive) at most craft stores or fabric stores. I got a strip about 1.25 inches wide. The backing was made of nylon, and the epoxy seems to adhere to that too.
The Remote Controlled TENS Machine:
I got the TENS machine from Amazon for 69.99 USD:
https://www.amazon.com/gp/product/B07DWSZPZV
The full title of the listing was “1byone Bluetooth TENS Therapy Muscle Stimulator for Pain Relief Electronic Pulse Massager with Wireless Control App, Variable Size Electrodes Pads”, and I’ve included a picture in case the listing goes away. The manufacturer / seller is “1byone”.
The best positions for the 4 TENS pads seemed to be on my abs about 2.5 inches above and 2.5 inches below my belly button, and about an inch apart. In the app, setting the manual controls to a frequency of 35 Hz and a pulse width of 250 microseconds seemed to produce the best results. For me, intensity settings below 10% were barely noticeable. 15% to 25% produced a stronger tingle. 25% to 40% started to produce stronger “contraction”-like feel. 40-50% started to hurt a bit. Above 50% started to actually hurt. As I got used to it though (and also as the pads started to lose their adhesion / conductivity probably), I was starting to go as high as 70%. These values of course are going to vary from person to person.
One thing about this TENS unit is that every time you change a setting, it produces a beep sound. I understand that this is for safety, but this was not only annoying, it would also give a warning when a “contraction” is about to hit. So I opened up the TENS control unit and removed the little buzzer / beeper and replaced it with an LED light instead. This required some delicate soldering work since the components are pretty small.
The Remote Controlled Vibrating Butt Plug:
This was by far the easiest component of the project. The butt plug is called “Hush”, created by Lovense:
https://www.lovense.com/vibrating-butt-plug
The list price is 109.00 USD, but I actually bought their prostate massager “Edge” too, which gives a 30 USD discount on the total, bringing the price for the Hush down to 94.00 USD.
It has its own remote control app that enables you to give control of the butt plug to anyone in the world with the app. They can then send you “vibration patterns”. I tried this while wearing my belly and an mpreg fetish friend would send me “contractions” while we cammed. It was good fun!
Creating an Integrated Experience:
The final step was to combine the TENS machine and the vibrating butt plug. I spent some time reverse engineering the TENS machine’s Android app, and with some patience I was able to control the TENS machine with my own Android app. The Hush butt plug (along with the rest of Lovense’s toys) was already reverse engineered, so that part was easy. The TENS and the butt plug are both Bluetooth devices, so they can both be controlled from a single phone and app.
The final component is a 2nd app, a remote control app, which allows sending “contractions” to the app controlling the TENS machine and butt plug. It can specify the intensity of the TENS, the intensity of the butt plug vibration, and the duration. It can also send an automatically repeating pattern.
The Roleplay:
My boyfriend knows about my mpreg fetish (or “my special interest”), and I’m lucky enough that he’s ok with participating in mpreg roleplays. The idea is that I have my belly, TENS, and butt plug on, and have my phone with my controller app. He has the remote controller app. I would be going about my day at home, and at some point he would start sending me “contractions”. Eventually they would get stronger, and I’d go to him and be like “uhmm, I think I’m in labor”. The contractions continue to grow, until we finally go to the bedroom. He keeps dialing up the intensity, and he has to coach me and “help relieve the pressure” (basically jack me off :) ) until I finally “give birth” (reach orgasm :D ).
We tried this over the weekend, and while there were a couple technical glitches (the butt plug in particular would disconnect sometimes for some reason), we overcame those, and overall it was a really intense and enjoyable experience!
Future Plans:
One feature I’m going to add is an “automatic” mode to the app. In this mode, the app automatically at some random time starts “labor”. It continues to ramp up the intensity, while randomly varying the frequency and duration of “contractions”, but generally making them last longer and start closer together. This adds some exciting unpredictability and allows both roleplay partners to be “at the mercy of labor”.
I also have an inflatable dildo, which is great for simulating “dilation”. “The booty sweller”, about 35 USD:
https://www.adameve.com/adult-sex-toys/d...98634.aspx
It would be very interesting to integrate this somehow into the simulation and have it be controlled by the app and automatically inflate over time. I would have to work out an air pump, a control mechanism, and some way to attach it to the inflatable dildo.
Finally, I’d like to add stirrups to the roleplay. My boyfriend and I tried some ropes tied to my feet, and then the ropes tied behind my back, but this didn’t give the right feel. I’d prefer something supporting my feet from below, and something to actually push my feet against.
Conclusion:
It’s been a fair bit of work getting all the different components together, but for me overall I think it was a great project to work on. The end result is a roleplay with whole new dimensions and sensations. Happy to answer any questions I can! Thanks for reading :)
