12-11-2019, 01:23 AM
I've been looking for ways to realistically simulate an mpreg delivery for years now and haven't found much success. The two issues I've had are realism and comfort. Inflatable buttplugs are great but they dont provide a realistic look of a head crowning. There are a few videos of guys out there delivering dolls, but that seems a bit tough given i don't want to stretch my hole to the point where normal intercourse is not pleasureable.
As such, I've designed a set of realistic toys which look like babys, which can be comfortably inserted and provide for a realistic simulation of a labor and delivery. Each toy is to-scale.
Option one is a solid silicone doll which has been cast from a 3d model. They are cast in a semi-soft silicone which makes the doll forgiving and comfortable to insert while retaining a realistic solidity to the body. These provide the most realistic birthing experience as the baby crowns without any inflation tube in the way. However, they do require a bit of stretching to insert, which negates the "stretching" effect of a hole during delivery. I've done a bit of work to make a first iteration and will post pics once done if anyone's interested.
Option two is a latex-based inflatable toy which can be inflated to the desired size once inserted. This is my preferred toy and is great for people who are starting out; it's easy to insert given it's small starting size and safe to pull out with the inflation tube. I haven't gotten too far with this design and I'm wondering whether it would be preferred by you all instead of a solid doll.
I can make the toys as full bodies, without legs (to shorten overall length) and without arms (to reduce width). This does reduce realism but overall inserted length without legs is shortened, allowing you to go wider with the head! I'm planning on manufacturing in 25% and 50% sizes for the inflatable and 50%, 65%, and 100% for the silicone. 65% scale is similar to the other silicone doll that has been posted on here.
Sizes are as follows. Note legs are bent to reduce overall length:
25% - 1.63" wide 6" long (head diameter ~1")
50% - 2.75" wide x 9" long (head diameter ~2.1875") / (91mm x 177mm x 52mm)
65% - (head diameter 3.1875")
Full scale - 7.75 wide x 13.75 long (head diameter ~4.175")
I'm currently testing different body shapes and limb angles to optimize comfort.
The purpose of this post is to test the waters.
I also plan on making some clips for C4S with the final product - let me know if you guys would be interested in seeing those. I would like to produce the most realistic delivery simulation vids!
These toys are still in development but I'm curious if anyone would be interested in purchasing one in the near future once completed. Let me know below!
Here are some pics of the models which will be cast. There is a full-sized head (nearly 4" diameter) and the full-body model is 65% scale.. Lines from the original 3D print wont be visible in the final silicone product.
As such, I've designed a set of realistic toys which look like babys, which can be comfortably inserted and provide for a realistic simulation of a labor and delivery. Each toy is to-scale.
Option one is a solid silicone doll which has been cast from a 3d model. They are cast in a semi-soft silicone which makes the doll forgiving and comfortable to insert while retaining a realistic solidity to the body. These provide the most realistic birthing experience as the baby crowns without any inflation tube in the way. However, they do require a bit of stretching to insert, which negates the "stretching" effect of a hole during delivery. I've done a bit of work to make a first iteration and will post pics once done if anyone's interested.
Option two is a latex-based inflatable toy which can be inflated to the desired size once inserted. This is my preferred toy and is great for people who are starting out; it's easy to insert given it's small starting size and safe to pull out with the inflation tube. I haven't gotten too far with this design and I'm wondering whether it would be preferred by you all instead of a solid doll.
I can make the toys as full bodies, without legs (to shorten overall length) and without arms (to reduce width). This does reduce realism but overall inserted length without legs is shortened, allowing you to go wider with the head! I'm planning on manufacturing in 25% and 50% sizes for the inflatable and 50%, 65%, and 100% for the silicone. 65% scale is similar to the other silicone doll that has been posted on here.
Sizes are as follows. Note legs are bent to reduce overall length:
25% - 1.63" wide 6" long (head diameter ~1")
50% - 2.75" wide x 9" long (head diameter ~2.1875") / (91mm x 177mm x 52mm)
65% - (head diameter 3.1875")
Full scale - 7.75 wide x 13.75 long (head diameter ~4.175")
I'm currently testing different body shapes and limb angles to optimize comfort.
The purpose of this post is to test the waters.
I also plan on making some clips for C4S with the final product - let me know if you guys would be interested in seeing those. I would like to produce the most realistic delivery simulation vids!
These toys are still in development but I'm curious if anyone would be interested in purchasing one in the near future once completed. Let me know below!
Here are some pics of the models which will be cast. There is a full-sized head (nearly 4" diameter) and the full-body model is 65% scale.. Lines from the original 3D print wont be visible in the final silicone product.